Via Busch Remote Control - ABB 6402U-500 Manual De Instrucciones

Operation
5.3 Busch Remote Control
a. Operating Mode 1:
The MEMO memories M1 and M2 are accessed via the IR
Hand-held, or Wall-mounted Transmitter - see appurtenant
Operating Instructions.
• Switch ON:
• Switch OFF:
• Brighter:
• Darker:
• MEMO:
• ALL OFF:
* Depending on which pair of pushbuttons on the IR Hand-
held Transmitter is operated, Output K1 or K2 is switched.
** Applies in respect of both Output K1 and K2.
b. Operating Modes 2 - 5:
In these operating modes, only Output K1 is controlled.
Output K2 switches according to the Table on page 76.
80
IR Operation
‚
Insert 6402 U-500 switches ON *
Insert 6402 U-500 switches OFF *
Insert 6402 U-500 switches ON *
No operation
- Create control state **
- Save MEMO
- Invoke MEMO 1 or 2
Insert 6402 U-500 switches OFF **
GB
80