Keyed Chucks; Keyless Chucks - Stryker SYSTEM G 7305-001-000 Instrucciones De Uso

7305-001-700 Rev-A

Keyed Chucks

1. Use the chuck key to open the jaws.
2. Insert the tool into the center of the jaws.
3. Use the chuck key to close the jaws.
4. Visually inspect the tool to make sure it is centered in
the jaws.
5. Gently pull on the tool to verify it is secure.
6. To remove the tool, use the chuck key to open the
jaws again.
www.stryker.com

Keyless Chucks

1. Hold the attachment and manually rotate the chuck to
open the jaws.
2. Insert the tool into the center of the jaws.
WARNING: DO NOT operate the handpiece to close
the jaws on the cutting tool.
3. Hold the attachment and manually rotate the chuck to
close the jaws.
4. Visually inspect the tool to make sure it is centered in
the jaws.
5. Gently pull on the tool to verify it is secure.
6. To remove the tool, hold the attachment and manually
rotate the chuck to open the jaws again.
EN
11