Kit Assembly; Din Radio Provision - Metra 99-7864 Instrucciones De Instalación

1. Snap the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down. (Figure A)
2. Slide the aftermarket radio into the cage
and secure. (Figure B)
3. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
4. Reassemble dash in reverse order
of disassembly.
Note: The orange wire coming out of
the back of the 99-7864 needs to be
connected to the orange illumination
wire coming from the Metra 70-1721
wire harness (sold separately).
Programming:
In order to adjust the 99-7864 to the
different types of radios available in the
Honda Accord, the 99-7864 has a
program feature.
4 Door Sedans ONLY:
To program the kit you will need to start
your vehicle then hold the A/C button for
approximately 5 seconds or until the light
starts to blink. The climate controls will be
programmed when the light stops blinking.

Kit Assembly 99-7864

DIN radio provision

(Figure A)
(Figure B)
2 Door Coupes ONLY:
To program the kit you will need to start
your vehicle then hold the Rear Defrost
button for approximately 5 seconds or
until the light starts to blink. The climate
controls will be programmed when the
light stops blinking.
5