Sauder Summit Station 425014 Folleto De Instrucciones página 15

Step 10
Fasten the remaining EXTENSION RAIL (35MA) to the LEFT END (B). Use
å
two GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.
NOTE: Turn a SCREW into hole #3. Then, slide the inner cartridge of the
å
EXTENSION RAIL in to fi nd hole #1 that lines up with the hole in the LEFT
END. Turn a SCREW into this hole.
www.sauder.com/service
Open end
B
425014
3S
GOLD 5/16" FLAT HEAD SCREW
(2 used for the RAIL)
1
2
3
Page 15