Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
Push twenty-three HIDDEN CAMS (1F) into the ENDS (A
å
and B), UPRIGHT (C), MODESTY PANELS (E and G), and
BRACE (N). Then, insert the metal end of a CAM
DOWEL (2F) into each HIDDEN CAM.
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Hole
B
N
Page 6
Do not tighten the HIDDEN CAMS in this step.
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
A
C
Arrow
Metal end
2F
425014
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/service/tips
2F
Metal end
(23 used)
G
1F
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Arrow
1F
E
Arrow
www.sauder.com/service
Publicidad
