Sauder Summit Station 425014 Folleto De Instrucciones página 26

Step 21
Carefully stand the assembly upright.
å
First, fi ll the hole in the LONG TOP (W) 1/4 to 1/2 full with
å
GLUE (54M). Then, insert the WOOD DOWEL (15F) into the
holes. Wipe away the excess GLUE.
Now, fi ll the hole in the UPRIGHT (C) 1/4 to 1/2 full with GLUE.
å
Flip the LONG TOP (W) over and fasten the TOP (W) to the
å
UPRIGHT (C) and SHORT MODESTY PANEL (G). Tighten six
HIDDEN CAMS.
NOTE: Be sure the WOOD DOWEL in the LONG TOP inserts
å
into the UPRIGHT. Wipe away the excess GLUE.
54M
C
Page 26
Part (W). Another
sturdier, easier,
friendlier component!
W
G
425014
Maximum
Arrow
210 degrees
Minimum
190 degrees
15F
54M
These holes
should be here.
W
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
Fill the holes 1/4 to 1/2 full with GLUE.
www.sauder.com/service