Sauder Summit Station 425014 Folleto De Instrucciones página 17

Step 12
First, fi ll the hole in the LEFT BOTTOM MOLDING (M) 1/4 to 1/2 full
å
with GLUE. Then, insert the WOOD DOWEL (15F) into this hole. Wipe
away the excess GLUE.
Now, fi ll the hole in the SHORT BRACE (P) 1/4 to 1/2 full with GLUE.
å
Fasten the SHORT BRACE (P) to the LEFT BOTTOM MOLDING (M).
å
Use one BLACK 2-3/8" FLAT HEAD BOLT (103S).
NOTE: Be sure the WOOD DOWEL in the LEFT BOTTOM MOLDING
å
inserts into the SHORT BRACE. Wipe away the excess GLUE.
NOTE: The BOLT will thread into the DOWEL in the SHORT BRACE.
å
54M
www.sauder.com/service
P
15F
425014
Fill the holes 1/4 to 1/2 full with GLUE.
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
M
BLACK 2-3/8" FLAT HEAD BOLT
(1 used for the SHORT BRACE)
Caution
!
103S
Page 17