Sauder Summit Station 425014 Folleto De Instrucciones página 31

Step 26
To insert the drawer into your unit, line up the EXTENSION SLIDES
å
on the drawer with the EXTENSION RAILS on the unit and push the
drawer into the unit until the drawer is fully inserted. The drawer will
push in hard until it is all the way in, then it will slide in and out easier.
Insert the GROMMETS (10P) and GROMMET CAPS (1P) into the
å
large holes in the TOPS (W and X).
Center a SCREW COVER (74P) over the head of each SCREW in the
å
LONG MODESTY PANEL (E) and RIGHT BACK (K) and gently tap in
with your hammer.
Using your hammer, gently tap a CAM COVER (75P) onto each visible
å
HIDDEN CAM and CROSS SLOTTED DOWEL.
To cover HIDDEN CAMS and
CROSS SLOTTED DOWELS
www.sauder.com/service
W
To cover screws
75P
425014
X
K
74P
1P
10P
To cover screws
E
35 lbs.
74P
Page 31