Publicidad
Step 14
First, fi ll the holes in the BRACE (N) 1/4 to 1/2 full with
å
GLUE (54M). Then, insert the WOOD DOWELS (15F)
into the holes. Wipe away the excess GLUE.
Now, fi ll the hole in the LEFT END (B) 1/4 to 1/2 full
å
with GLUE.
Fasten the BRACE (N) to the LEFT END (B). Tighten
å
one HIDDEN CAM.
NOTE: Be sure the WOOD DOWEL in the BRACE
å
inserts into the LEFT END. Wipe away the excess GLUE.
www.sauder.com/service
54M
15F
425014
Maximum
Arrow
210 degrees
Minimum
190 degrees
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
B
Finished edge
S u r
f a c
H I D
e w
D E N
i t h
N
C A
M S
Page 19
Publicidad
