Sauder Summit Station 425014 Folleto De Instrucciones página 18

Step 13
First, fi ll the hole in the RIGHT BACK (K) 1/4 to 1/2 full with GLUE.
å
Then, insert the WOOD DOWEL (15F) into this hole. Wipe away the
excess GLUE.
Now, fi ll the hole in the SHORT BRACE (P) 1/4 to 1/2 full with GLUE.
å
Next, fasten the RIGHT BACK (K) to the LONG MODESTY PANEL (E).
å
Tighten two HIDDEN CAMS.
NOTE: Be sure the WOOD DOWEL in the RIGHT BACK (K) inserts
å
into the SHORT BRACE (P). Wipe away the excess GLUE.
Fasten the RIGHT BACK (K) to the SHORT BRACE (P). Use one
å
BLACK 2-3/8" FLAT HEAD BOLT (103S).
54M
BLACK 2-3/8" FLAT HEAD BOLT
(1 used for the SHORT BRACE)
Caution
Risk of damage or
injury. HIDDEN CAMS
must be completely
tightened. HIDDEN
CAMS that are not
completely tightened
may loosen, and parts
may separate. To
completely tighten:
Page 18
i t h
e w
f a c
s
o l e
S u r
r e h
m o
K
P
103S
Start
Arrow
425014
Fill the holes 1/4 to 1/2 full with GLUE.
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
E
Tighten
Maximum
210 degrees
Minimum
190 degrees
Caution
Arrow
www.sauder.com/service