Checking The Cutting Safety; Inserting Instrument In A Trocar - Erbe BiCision Manual Del Usuario

OBJ_DOKU-189629-009.fm Seite 24 Dienstag, 11. Dezember 2018 11:34 11
The principle of working with the cutting safety locked is de-
scribed in the instructions below.
6.8

Checking the cutting safety

1. Make sure that the cutting safety is in the locked position:
The lever of the cutting safety is pointing down. The red
marking on the lever is visible.
6.9

Inserting instrument in a trocar

!
1. For laparoscopic procedures: Insert the instrument in the
trocar with the instrument jaws closed.
24