Steelcase High-Density Storage Instrucciones De Montaje página 13

®
Worksurface-to-Tower
Connector
(continued)
3.
Align the holes in the
bracket and the storage unit
with the pre-drilled holes in
side of unit and fasten with
five (5) #10 x 5/8" wood
screws.
4.
Place worksurface on
top of bracket and flush the
rear of the worksurface with
the rear of the storage unit.
Install five (5) #10 x 5/8"
wood screws to fasten
worksurface to bracket.
#10 X 5/8"
WOOD SCREW
3
BRACKET
#10 X 5/8"
WOOD SCREW
4
Page 13 of 39
76456 Rev C