Steelcase High-Density Storage Instrucciones De Montaje página 2

®
Removal of Plastic Lock Plug and
Installation of Lock Cylinder
For Right Hand Unit
1.
Pull open plastic plug cover.
2.
While pressing the plug retainer tab
to the right, insert a coin or the head of a
o
key into the slot and turn 90 clockwise.
This will unlock the case. You will hear
the lock mechanism open.
CAUTION: Make sure you unlock the
case BEFORE proceeding to step 3.
3.
Push plug retainer tab down and
remove plastic plug from parent unit.
4.
Position lock cylinder tab at 45
or 2:00 position. Insert lock cylinder at
a tilted angle so the tab will collapse.
CAUTION: Make sure the tab is
o
located at 45 or 2:00 before
inserting lock cylinder.
5.
Push lock cylinder into the hole until
it stops and turn the lock plug assembly
o
clockwise 45 (or the 3:00 position) and
remove the key.
CAUTION: Failure to follow the installation
instructions will cause inability to install lock.
1
PLUG RETAINER TAB
2
COIN OR
HEAD OF KEY
TURN 90 o
3
o
C L
PLUG RETAINER TAB
4
o
45 or 2:00
TAB
For Left Hand Unit
1.
Pull open plastic plug cover.
2.
Push plug retainer tab down and
remove plastic plug from parent unit.
PLASTIC PLUG
COVER
3.
Position lock cylinder tab at 45
or 10:00 position. Insert lock cylinder at
a tilted angle so the tab will collapse.
CAUTION: Make sure the tab is
o
located at 45
inserting lock cylinder.
4.
Push lock cylinder into the hole until
it stops and turn the lock plug assembly
o
clockwise 45 (or the 12:00 position) and
remove the key.
PLASTIC PLUG
o
45 or 10:00
5
o
45
3:00
o
or 10:00 before
C L
3
TAB
1
PLASTIC PLUG
COVER
2
PLUG RETAINER TAB
PLASTIC PLUG
4
12:00
o
45
Page 2 of 39
76456 Rev C