Sauder Carson Forge 419575 Manual De Instalación página 22

Step 18
Turn four BLACK 2" FLAT HEAD SCREWS (70S) into
å
the edges of the SHELF (H) until the shoulders of the
SCREWS rest on the edge surface of the SHELF.
NOTE: Do not overtighten the SCREWS.
å
Slide the SIDE MOLDINGS (Z) onto the SHELF (H). Line
å
up the grooves in the MOLDINGS over the heads of the
SCREWS in the SHELF.
NOTE: If the MOLDING comes up off of the SCREWS,
å
remove it and slide it on again.
Z
BLACK 2" FLAT HEAD SCREW
Page 22
H
70S
(4 used in this step)
Z
Shoulder
419575
Hey! It's starting to look
like something!
Apply pressure with your hands
as you guide the MOLDINGS over
the SCREWS and onto the ENDS.
www.sauder.com/services