Sauder Carson Forge 419575 Manual De Instalación página 32

Step 28
Place your unit in its fi nal location against a wall.
å
We recommend using the SAFETY BRACKET (1G) for added stability. Use a BLACK 9/16" LARGE HEAD
å
SCREW (1S) into the top of the unit and a BLACK 1-7/8" PAN HEAD SCREW (16S) into a stud in your wall.
Push a CAM COVER (12P) onto each visible HIDDEN CAM.
å
Apply the WARNING LABEL (9L) to the LEFT END (B) near the top. You should be able to read the label when the DOORS are
å
open. When the DOORS are closed, the label will be hidden. Peel off the backing and apply the label as shown in the diagram.
NOTE: This is a permanent label intended to last for the life of the product. Once applied, do not try to remove it.
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story?
9L
100 lbs.
100 lbs.
Page 32
No load
B
BLACK 1-7/8" PAN HEAD SCREW
1G
BLACK 9/16" LARGE HEAD SCREW
(1 used into the top of your unit)
• Severe injury and death can occur
when unauthorized or untrained
persons, including children, use guns.
• Guns should always be unloaded
and locked when stored.
• Keep cabinet keys in a secure place
away from children and unauthorized
persons.
• Ammunition should be stored and
locked separately from guns.
• Always comply with safe gun storage
laws and recommendations. This cabinet/
bench provides limited security for long
guns, and is not intended for handguns
and other fi rearms.
12P
(22 used)
To cover HIDDEN CAMS
419575
(1 used into a stud in your wall)
16S
1S
WARNING
373366
www.sauder.com/services