Sauder Carson Forge 419575 Manual De Instalación página 29

Step 25
Refer to the enlarged diagram to identify the parts on
å
the HINGES.
The DOORS may need some adjustments. Follow the text
å
below to make needed adjustments.
DOOR ADJUSTMENTS:
å
To adjust the DOORS from side to side (horizontal), turn the
adjusting screw in or out.
To adjust the DOORS up and down (vertical), loosen both
å
vertical adjustment screws. Move the DOORS up or down to the
desired location. Tighten the screws after making adjustments.
To adjust the DOORS in or out (depth), loosen the mounting
å
screw one turn and move the DOORS in or out, as needed.
Tighten the mounting screw after making adjustments.
Adjusting screw (horizontal)
13H
Adjusting screw (horizontal)
14H
www.sauder.com/services
Mounting screw (depth)
(vertical adjustment)
Mounting screw (depth)
(vertical adjustment)
419575 Page 29