Oregon Scientific HR102 Manual De Uso página 11

2. MODE BUTTON
Changes the operating mode or holds to enter the setting
mode
3. SET BUTTON
Changes a value in the setting mode or turns on or off the
alarm clock in alarm clock mode, reset stop watch
4. ST/SP BUTTON
Starts or stops the stopwatch
5. TIME /
Displays the heart rate or hold to activate the heart rate alert
THE TRANSMITTER
The transmitter is used to count your heartbeat and transmit the
data to the receiver. To put it on,
1. Wet the conductive pads on the underside of the transmitter
with water or a conductive gel to ensure a solid contact.
2. Strap the transmitter across the chest. Adjust the strap until
the transmitter sits snugly below the pectoral muscles for an
accurate
HINTS
• The position of the transmitter affects its performance. Move
BUTTON
4