Comet C610H Manual De Instrucciones página 20

- paints of all kinds and types;
- liquids containing granules or solid parts in suspension.
• The motor pump must not be integrated in machines designed to wash: people, animals, energized
electrical apparatus, delicate objects, the motor pump itself or the machine in which it is integrated.
• The motor pump is not suitable for being integrated in machines designed to operate in environments
with special conditions such as, for example, corrosive or explosive atmospheres.
• For integration in machines designed to operate on board vehicles, ships or planes, contact the
Manufacturer's Technical After-Sales Service, inasmuch as additional requirements may be necessary.
all other uses are to be deemed incorrect.
The Manufacturer disclaims all liability for any damage deriving from incorrect or erroneous
uses.
m
WaRninG
• The motor pump cannot be operated unless the machine in which it is integrated conforms
to the safety requirements laid down by European directives. Such conformity is indicated
by markings and by the declaration of conformity of the Manufacturer of the machine
in which the motor pump is integrated.
• Also follow the instructions contained in the use and maintenance manual of the machine
in which the motor pump is integrated.
• Make sure all deliveries are off or connected to accessories that have been turned off (e.g., tap in "OFF"
position).
• Check the tightness of the clamps connecting the pipes to their fittings.
• Make sure that the moving parts of the motor pump are suitably protected and that they are not
accessible to unauthorised persons.
• Do not use the motor pump (and therefore the machine in which it is integrated) in the event of:
- important parts such as the high pressure pipes (both of the hydraulic oil circuit and that of the
pumped fluid) are damaged;
- its having suffered heavy knocks;
- there are obvious leaks of fluid from the hydraulic oil circuit and/or from that of the pumped fluid.
In such cases, have the motor pump and the machine in which it is integrated checked by a Skilled
Technician.
• Have a Skilled Technician perform the inspections required by special maintenance.
• Wear clothing and personal protective equipment able to provide adequate protection from any
high-pressure jets and chemical products used.
carry out the preliminary activities indicated in the manual of the machine in which the motor
pump is integrated.
cauTiOn
• In case of operation at very low temperatures, make sure there is no ice inside the motor pump and
pipes.
• Carry out the controls scheduled for routine maintenance.
chEckinG anD cOnnEcTinG uP TO ThE hYDRaulic ciRcuiT (Oil)
m
WaRninG
• Also follow the instructions given in the manual of the machine in which the motor pump
is integrated, paying particular attention to the operations for connecting to the hydraulic
(oil) control circuit.
20
PREliMinaRY acTiViTiES