geberit ECO 203 Operación Manual página 23

Using personal protective equipment
Without suitable protective equipment, people can be
seriously injured or killed due to flying fragments from the
pressing attachments.
• Wear a hard hat and protective goggles during the pressing
procedure
Maintenance and repairs only to be carried out by repair
shops
Pressing tools and pressing attachments that are not
maintained, or are not professionally maintained, can cause
serious accidents.
• Maintain the pressing tool and pressing attachments in
accordance with chapter entitled "Maintenance"
• It is imperative that users comply with the date of the next
maintenance inspection, stated on the service sticker
• Maintenance and repair work may only be performed by
authorised repair shops
Avoiding health hazards during permanent operation
Limit values for vibration emission values and noise
annoyance can be exceeded during continuous operation and
be harmful to health.
• Wear vibration protection gloves with rubber or foam
padding
• Schedule breaks and activities in places not exposed to
vibration
• Wear ear protection
Notes in accordance with EN 60745
The device is accompanied by the document "Basic safety
notes for electric tools". This contains additional safety notes
in accordance with EN 60745.
B1279-001 © 02-2016
966.996.00.0 (00)
EN
23