Operation; Attaching The Push Handle; Transport Position/Working Position; Filling The Detergent Solution - Kärcher BR 400 Manual De Instrucciones

English

1. Operation

Attaching the push handle

Transport position/working
position
Transport
position
Working position

Filling the detergent solution

• On unpacking the unit you will find the upper push handle folded
down.
• Position the lower push handle half vertically, attach the upper
half and screw together using the supplied screws and nuts.
Caution:
Do not clamp the cable during assembly.
A switch is located on the side of the unit which can be locked in
9 positions.
Caution:
The transport or working position can only be selected when the
push handle is in a vertical position.
• Transport position
Pull switch and rotate in an anti-clockwise direction as far as the stop.
Note: The unit remains on the transport wheels even when the push
handle is folded.
• Working position
Pull switch and rotate in a clockwise direction as far as the stop.
Note: Intermediate positions can be selected for sensitive floor
surfaces or for light scrubbing.
Caution:
When the push handle is folded, the complete weight of the unit
rests on the brushes. While the unit is not being used, position the
push handle vertically to avoid damaging the brushes.
Note: Please comply with the manufacturer´s metering instructions
and ensure that the detergent solution is well mixed.
• When filling using a hose or a bucket, open the cover of the fresh
water container and fill with water and detergent (max. 60 °C).
Replace the cover after filling.
• Remove fresh water container when filling under a faucet. Be
sure to pull off the attached hose first. After filling, replace the
container, hose and cover.
BR 400
11