Description Of Functions - Miele DUU 600 Manual De Instrucciones

Description of functions


Danger of toxic fumes!
This conversion kit is designed to
direct air back into the room in which
the cooker hood is installed. If you
want the air to be directed to the
outside and your dwelling has a
heating appliance that relies on air in
the room for combustion extreme
caution is required.
It is essential to observe the warning
and safety instructions in the
instruction manual for your cooker
hood. Building regulations must also
be complied with.
This conversion kit is intended for use
in domestic households and similar
working and residential environments.
This conversion kit must only be used
for converting a Miele cooker hood to
recirculation mode.
Air is drawn in and passed through a
grease filter and a charcoal filter in the
cooker hood to clean it. It is then
directed through a ventilation grille back
into the kitchen.
The cooker hood must be suitable for
recirculation mode. Please observe the
operating instruction manual supplied
with the cooker hood.
Please ensure that the grease filters and
the charcoal filters are fitted.
Please see the installation instructions
supplied with the cooker hood for
instructions on how to install it.
en - Operating instructions
Installation
The recirculation box is suitable for
installation in small spaces such as the
plinth area of the kitchen. It can also be
installed in other places if you prefer.
When choosing where to install it check
the direction of airflow and that it can
flow unhindered out of the recirculation
box. It must not be directed towards the
ceiling or a wall. It should also not be
directed towards areas in which people
congregate.
 Please observe the illustrations with
regard to building-in dimensions and
installation at the end of these
operating and installation
instructions.
Ducting
The recirculation box has a connector
measuring 222 x 89 mm.
Flat ducting components are available
as accessories for connecting the
extractor to the recirculation box, and
for connecting multiple recirculation
boxes to one another.
Use smooth or flexible ducting made
from suitable non-flammable
materials for the extraction ducting
used between the cooker hood and
the recirculation box.
 When laying the ducting, please
observe the information in the
operating and installation instructions
for your cooker hood.
7