Step 4: Connecting The Antenna (Aerial) - Sony HT-IS100 Manual De Instrucciones

Step 4: Connecting the Antenna (Aerial)

Connecting the AM loop antenna (aerial)
The shape and the length of the antenna (aerial) is designed to receive AM signals. Do not dismantle
or roll up the antenna (aerial).
1
Remove only the loop part from the plastic stand.
2
Set up the AM loop antenna (aerial).
3
Connect the cords to the AM antenna (aerial) terminals.
The cords can be connected to either terminal.
Bottom of the subwoofer
BD IN DVD IN
IR REMOTE
IR IN IR OUT1 IR OUT2
DMPORT ECM-AC2
DC 5V
0.7A MAX
EZW-T100
Note
• Do not place the AM loop antenna (aerial) near the system or other AV component, as noise may result.
Tip
• Adjust the direction of the AM loop antenna (aerial) for best AM broadcast sound.
4
Make sure the AM loop antenna (aerial) is connected firmly by pulling softly.
22
US
SAT IN TV OUT
HDMI
ANTENNA
FM AM
75
COAXIAL
IR-R100
OPTICAL ASSIGNABLE
COAXIAL
TV IN DVD IN SAT IN SAT IN
A
DIGITAL
SPEAKER ONLY F
CENTER FRONT R FRONT L
Insert the cords by pushing down the terminal clamp.
Insert until this
part.