VM Motori D703E2 Manual De Instrucciones página 108

Cooler
GB
Crankshaft rotation
Combustion sequence
Timing
Minimum idling speed (standard
engine)
Dry shipping weight of engine
Maximum permanent lengthwise
inclination (with handwheel up)
Maximum permanent lengthwise
inclination (with handwheel
down)
Maximum permanent crosswise
inclination
POWER AND TORQUE
Maximum operating speed
Maximum power
Maximum torque
CONSUMPTION AT MAXIMUM POWER
Specific fuel consumption
Specific oil consumption
FUEL SUPPLY CIRCUIT
Type of injection
Type of fuel
English
D754SE3
Anticlockwise (observing the engine from the
1-3-4-2
Pushrods and rocker arms With hydraulic tappets and
camshaft - Gear cascade control and camshaft fitted
rpm 900 +/-50
kg 250
Degrees 30°
Degrees 35°
Degrees 30°
(rpm) 2600
kW (CV) @
rpm 51,5 (70)
220 (22,4)
Nm (kgm)
@ rpm @ 1400
g/kWh
g/CVh 0,5 ÷ 1
The engine has been designed to be powered by standard fuels
available on the European market (according to specifications DIN
EN 590). If it is to be powered by BIODIESEL fuels (according to
specifications UNI EN 14214), it can be mixed, up to 5%, with fuel
available on the European market (according to regulation DIN EN
Do not use fuels with specifications other than those indicated
28
D700-750E2_E3
D754TE3
water/oil
handwheel side)
1-3-4-2
on the crankbase
900 +/-50
250
30°
35°
30°
2600
59,8 (81,3)
274 (27,9)
@ 1800
0,5 ÷ 1
Direct injection
590).
IMPORTANT
i
VM p/n 42432097F Ed.4 - 2015-05
D754IE3
1-3-4-2
900 +/-50
250
30°
35°
30°
2600
70 (95,2)
400 (40,7)
@ 1000
0,5 ÷ 1