Sony PMW-350 Manual De Instrucciones página 3

Overwrite protection for read-only files
Protects read-only files from being overwritten when they are
saved. When files are saved by the menu items under FILE (listed
below), read-only files are displayed grayed out, and are not
selectable.
• All >All File Save
• Scene >Scene Store
• Reference >Reference Save
• Lens >Lens Store
Camera adaptor
CA-FB70 and CA-TX70 are supported.
Major functions updated with V1.4
Usable media
XQD memory card series added (with XQD ExpressCard Adapter
QDA-EX1)
Restrictions
• For restoration of media recorded with this unit, be sure to use
this unit. Media recorded with a device other than this unit or
with another unit of different version (even of the same model)
may not be restored using this unit.
• High-speed playback may not be properly achieved.
• Slow Motion recording by the Slow & Quick Motion recording
function cannot be made.
• Not all XQD memory cards are guaranteed to work with this
camcorder. For compatible memory cards, contact your Sony
dealer.
Rec Start/Stop Beep function
A beep sound can be generated automatically at start and stop
of recording.
• The MAINTENANCE >Camera Config >Rec Start/Stop Beep
menu item allows you to turn this function On and Off.
Indication of recording status
An animation can be displayed on the viewfinder to indicate that
recording is being performed.
• The MAINTENANCE >Camera Config >Rec Status Indicator
menu item allows you to turn this function On and Off.
• The OPERATION >Super Impose >Super(Rec Status Indicator)
menu item allows you to select whether or not to superimpose
the recording status indication on the video output.
RM-B170
The unit supports the remote control unit RM-B170.
ATW offset adjustment
It is possible to set an offset to add to ATW by specifying the
color temperature.
• The OPERATION >Offset White >Offset White <ATW> menu
item allows you to turn this function On and Off.
• The OPERATION >Offset White >Warm Cool <ATW> menu item
allows you to specify the color temperature (in the rage 1600K
to 16000K).
Major functions updated with V1.3
Clip names
User-specified characters can be displayed (MP4/AVI).
Planning metadata
Shooting with planning metadata is possible.
• Planning metadata can be read from recording media inserted
into a memory card slot.
• The planning metadata to be read can be selected.
• Clip names based on names defined in planning metadata can
be specified.
• Clip names can be specified in languages other than English.
• More shot marks can be added.
• Shot mark names can be specified in languages other than
English.
• Shooting information can be reflected in planning metadata.
• Information contained in planning metadata can be viewed.
DWR-S01D
Data from the DWR-S01D Digital Wireless Receiver can be
recorded as metadata.
Color bars
SMPTE color bar can be selected.
Lens diaphragm adjustment
The lens diaphragm was sometimes slow to close completely, so
that auto black balance did not end normally. That problem was
corrected.
Picture cache recording
When recording was performed in picture cache mode (picture
cache time: 13 to 15 seconds) with i.LINK output, the cache data
in memory was sometimes not recorded. That problem was
corrected.
Power supply after shutdown
The power supply no longer becomes unstable after a restart
following shutdown due to decline in DC IN voltage.
Filter functions
When OPERATION >White Setting >Filter White Memory was
set to On, and the Electrical CC function was assigned to one of
the assignable switches, white balance settings were formerly
memorized for each FILTER knob position. This was changed
to memorize white balance settings for each of MAINTENANCE
>White Filter >Electrical CC<A>, Electrical CC<B>, Electrical
CC<C>, and Electrical CC<D> settings.
Restrictions
If recording is started immediately after the unit starts, higher
priority is given to starting to record than to reflecting planning
metadata. For this reason, even when planning metadata is being
read, it may sometimes not be reflected in the recording.
Major functions updated with V1.15
Usable media
Support "New SxS-1 (SBS-32G1A/64G1A)" with improved data
read speed.
Zoom control
Improve zoom control so that it functions properly when Zoom
is assigned to the ASSIGNABLE 4 or 5 switch and OPERATION
>Assignable SW >Zoom Speed in the setup menu is set to 99.