Using The Garment Steamer; Using The Accessory Hose And The Small; Above-Floor Pocket Tool - Shark S6005EU Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32

USING THE GARMENT STEAMER

Certain models only
For a full list of what
is included with your
Steam Cleaner, please
refer to box's top panel.
CAUTION:
Make sure the
Handheld Steamer
is unplugged or
in Standby mode
while attaching
or removing the
accessory. Avoid
touching the
accessory, as it
How to Attach/Detach:
will be very hot
• Use the lavender loop on the side of the
after steaming.
bonnet to slide over the nozzle opening of the
Garment Steamer. (Fig. 15).
CAUTION: To
• Snap the bristle frame over the bonnet with
avoid scalding
the bristles placed at the top of the Garment
injuries, always
Steamer bonnet.
unplug and
• Attach the assembled Garment Steamer to the
allow the Steam
Handheld Steamer by snapping it into the main
Cleaner to cool
nozzle. (Fig. 16).
before removing
• To remove, wait 2 to 3 minutes for the tool to
or changing
cool, hold the release button and pull the tool
accessories
away from the unit.
or pads.
Usage:
• The Garment Steamer is ideal for removing
wrinkles from clothing and for freshening and
grooming upholstery.
• The bonnet and frame with bristles provide
controlled steaming for fabrics and upholstery.
Cleaning Tips:
• Pressing the steam trigger in 3-to-5-second
bursts, move slowly up and down over your
garments or upholstery. (Fig. 17).
• Always determine color fastness of any fabric,
especially with reds or blues:
– Take a clean, moist, warm towel and gently
rub a small area on the fabric that is as out of
sight and out of the way as possible.
– If color bleeds onto the towel, you may need
to have the piece professionally cleaned.
13
s h a r kc l e a n . e u
Fig. 15
Fig. 17
USING THE ACCESSORY HOSE AND THE
SMALL ABOVE-FLOOR POCKET TOOL
For a full list of what
is included with your
Steam Cleaner, please
refer to box's top panel.
Fig. 16
CAUTION: Make
sure the Handheld
Steamer is
unplugged or in
Standby mode
while attaching
or removing the
accessory. Avoid
touching the
accessory, as it will
be very hot after
steaming.
CAUTION:
To avoid scalding
injuries, always
unplug and
allow the Steam
Cleaner to cool
before removing
or changing
accessories or pads.
Fig. 18
Fig. 20
How to Attach/Detach:
• First attach the Accessory Hose to the
Handheld Steamer by snapping the Accessory
Hose into the main nozzle. (Fig. 18).
• Slide the pad over the Small Above-Floor Pocket
Tool so it fits snugly. Attach the elastic band and
slide the locking toggle to securely tighten the
pad over the tool.
• Connect the Small Above-Floor Pocket Tool to
the steam nozzle at the end of the accessory
hose. Slide the base of the tool over the tip of
the nozzle until the tool clicks securely into
place. (Fig. 19).
• Do not use the Small Above-Floor Pocket Tool
without the pad attached.
• To remove, wait 2 to 3 minutes for the tool to
cool, hold the release button and pull the tool
away from the unit.
Usage:
• The Small Above-Floor Pocket Tool is ideal for
small, uneven surfaces. The pointed tip is great
for edges and corners. (Fig. 20).
Cleaning Tips:
• Additional attachments are available for your
accessory hose. Please visit
sharkaccessories.com for more information.
s h a r kc l e a n . e u
Fig. 19
14

Publicidad

Tabla de contenido
loading

Tabla de contenido