Manual Mode - BH FITNESS G-6446 N Manual De Instrucciones

ELEMENTS OF THE MONITOR
A: These five displays provide a continuous rea
dout of Calories; Pulse rate; Time; Speed and
Distance.
B: The electronic monitor has 7 push buttons or
keys. BODY- FAT;
STOP/RESET; SPEED Km/h (+ -); START.
C: Quick access push-buttons or keys for
speed settings (3- 6 -9 -12).
D: BODY- FAT; MANUAL and PROGRAM (P1-
P6) indicator lights.
g: Safety key.
F: Fan ON/OFF push-button or key.
STARTING
Plug the unit into a wall socket with an EARTH
terminal and set switch (L) to position (1), Fig.
The safety key (g) must be inserted into its spot
(E) Fig 2 ,otherwise the machine will not operate.
As soon as the safety key (g) is in place, the
machine will beep and all of the displays will
show a [00:00] value, indicating that the
machine is READY to be used.
English
ENTER; MODE;
OPERATING INSTRUCTIONS

MANUAL MODE

Pressing the START key will light the MANUAL
indicator on the set of indicator lights (D) and the
machine will start within 3 seconds, shown by
a countdown on the TIME display, at a speed of
1.0 km/h. You can increaseor decrease the
speed setting in MANUAL mode by pressing the
+ -) keys, between 1.0 – 13 km/h, you can also
increase or decrease the speed setting by
pressing the quick access keys (C), the said
keys correspond to values of 3- 6 -9 -12 km/h.
The machine will stop if you press the STOP key
or if you remove the SAFETY KEY
PROGRAM MODE.
This monitor has eight programs (BODY FAT;
MANUAL; P1;P2; P3; P4; P5; P6 ), programs
(P1 to P6) each have three elevation manual
settings (L1 – L3), giving a total of 18 different
programs (see Pro gram graphs).
7