Agilent Technologies 2100 Guia De Instalacion página 88

4
Installing the Agilent 2100 Bioanalyzer System
Setting up the Agilent 2100 Bioanalyzer
3 Open the lid of the 2100 Bioanalyzer and slide the electrode cartridge into
4 Connect one end of the serial cable to the RS-232 port located at the rear of
88
the lid and move the lever into a flat (closed) position.
Lid
Electrode cartridge
Electrodes
Chip selector
(not present in G2939B)
Heater plate
Focusing lense
the instrument.
RS-232 port
Power input socket
Power switch