Agilent Technologies 2100 Guia De Instalacion página 89

5 Connect the other end of the serial cable to the serial port (COM-port) of
your PC.
6 If your PC is not equipped with a serial port, use the USB/serial adapter
cable that is provided with the instrument.
7 Ensure that the power switch located at the rear of the instrument is in off
position.
The power input socket accepts a line voltage of 100-240 VAC ±10% with a line frequency
N O T E
of 50-60 Hz. Maximum power consumption is 60 VA. There is no voltage selector at the
rear of the Agilent 2100 Bioanalyzer because the power supply has a wide-ranging
capability.
8 Plug the female end of the power cord into the power input socket of the
Agilent 2100 Bioanalyzer instrument. Plug the male end of the power cord
into the electrical outlet.
Installing the Agilent 2100 Bioanalyzer System
Setting up the Agilent 2100 Bioanalyzer
4
89