5
Starting the Agilent 2100 Bioanalyzer
Turning on the Agilent 2100 Bioanalyzer
Turning on the Agilent 2100 Bioanalyzer
1 Turn on your Agilent 2100 Bioanalyzer. The power switch is located at the
2 The status indicator lamp will light green if power is present and all
Status Indicator
Green - Ready
Green, flashing - Busy
Orange - Self-test
Red - Error
3 Once your Agilent 2100 Bioanalyzer has passed the self- tests, it is ready to
4 Start your PC by pushing the appropriate power buttons as outlined in the
92
rear of the instrument, where the power cable plugs in (see step 4 on
page 88).
instrument self-tests have passed successfully.
If the status indicator lamp lights red, this indicates a hardware error. In
this case, please refer to the Troubleshooting section of the Agilent 2100
Bioalyzer Maintenance and Troubleshooting Guide or the Online Help.
run samples.
documentation.