Slave Flash Mode - Rollei 58 Instrucciones

Group A: Press the [Wireless Parameter setting button] so that (A) twinkles .
Rotate the dial to change group A model . Shift between "off wireless " and
"Multi mode" . If the setting is done, press the [Wireless Parameter setting
button] to quit group A setting and go into group B model setting .
Group B: Press the [Wireless Parameter setting button] so that (B) twinkles . Ro-
tate the dial to change group A model . Shift between "off wireless " and " Multi
mode" . If the setting is done, press the [Wireless Parameter setting button] to
quit group B setting and go into group C model setting .
Group C: Press the [Wireless Parameter setting button] so that (C) twinkles .
Rotate the dial to change group A model . Shift between "off wireless " and
"Multi model" . If the setting is done, press the [Wireless Parameter setting
button] to quit .
When the SLAVE flash light group setting is done, you can turn it on or off . ON:
Wireless flash model group number will be shown on the display . OFF: Wireless
group number won't be displayed .
Note: [Wireless Parameter select button] is the same as [Zoom button] .

SLAVE Flash Mode

The SLAVE flash mode can be divided into:
• Wireless instruction mode (SLAVE c/SLAVE n )
• Wireless optical flash mode
Press the [Flash mode select button] for 3 seconds . The flash light will shift
between flash mode (TTL/M/Multi) and SLAVE flash mode (E-TTL SLAVE c /i-TTL
SLAVE n ) .
Under normal flash mode: Press the [Flash mode select button] for 3
seconds to shift into wireless flash mode .
Under Wireless flash mode: Press the [Flash mode select button] shortly to
shift the flash light between E-TTL SLAVE c mode, i-TTL SLAVE n mode, M S1
mode and M S2 mode .
79