Gold 5/16" Flat Head Screw; Silver 5/8" Machine Screw - Sauder 425811 Instrucciones De Montaje

Step 24
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D132 and D138).
å
Fasten the DRAWER RIGHT (40DC) to the RIGHT DRAWER SIDE (D132) and the DRAWER LEFT (40DD) to the LEFT
å
DRAWER SIDE (D138). Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #2.
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
NOTE: The glides are not intended to rotate.
å
Fasten a PULL (149K) to the DRAWER FRONT (O). Use two SILVER 5/8" MACHINE SCREWS (15S).
å
Glide end
1
2
Center the screw in the oval hole.
Page 30
10A
D138
149K
Drawer Slide
VIEW THE DRAWER GLIDE VIDEO

SILVER 5/8" MACHINE SCREW

(2 used for the PULLS)
O
3S

GOLD 5/16" FLAT HEAD SCREW

(4 used for the SLIDES)
425811
15S
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D132
2
www.sauder.com/service
Glide end
1