Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
8 Touch any symbol on the glass to cancel
the alarm.
NOTE
If symbol
is touched for more than two
seconds, the time remaining before the end of
the cooking process is displayed and the indi-
cator light flashes.
Setting an end-of-cooking time
1 Touch symbol
on the glass until the
indicator light above the symbol starts
flashing.
2 Set the specific time you want the cooking
process to end at by touching the +
symbol on the glass.
3 Two beeps are then heard and the flashing
indicator light comes on permanently to
indicate that the oven is set to turn itself
off automatically.
4 The clock shows the real time again.
5 Choose a temperature and a cooking func-
tion.
6 To modify the set time, touch symbol
and then touch the + and – symbols on the
glass. Two beeps are heard to confirm the
new setting and the real time appears on
the clock again.
7 When the end-of-cooking time is reached,
the oven turns itself off, the alarm sounds
and the indicator light starts flashing.
8 Touch any symbol on the glass to cancel
the alarm.
NOTE
Touch symbol
to display the end-of-cook-
ing time that has been set.
Setting a cooking time and an end-of-cooking
time
1 Set the cooking time (length of time).
2 Set the end-of-cooking time.
3 Choose a temperature and a cooking
function.
26
4 The oven remains off and the indicator
lights above symbols
and
light up.
The oven is set for a cooking time and an
end-of-cooking time.
5 When the time to start cooking is reached,
the oven turns itself on and cooks for the
period of time set as the cooking time.
6 When the set end-of-cooking time is reached,
the oven turns itself off, the alarm sounds
and the indicator lights above symbols
and
start flashing.
7 Touch any symbol on the glass to cancel
the alarm.
Setting the alarm
1 Touch symbol
on the glass until the
indicator light above the symbol starts
flashing.
2 Set the period of time at the end of which
you want the alarm to sound by touching
symbol + on the glass.
3 Two beeps are then heard and the indicator
light comes on permanently to indicate
that the alarm is set.
4 To modify the set time, touch symbol
on the glass and then touch symbols +
and – . Two beeps are heard to confirm
the new setting, and the real time appears
on the clock again.
5 When the period of time set for the alarm
comes to an end, the alarm sounds and
the indicator light starts flashing.
6 Touch any symbol on the glass to cancel
the alarm.
NOTE
If symbol
is touched for more than two
seconds, the time remaining before the alarm
is set to sound is displayed, and the indicator
light flashes.
IMPORTANT
A setting can be cancelled by touching sym-
bols + and – on the glass and the relevant
function at the same time.
In the event of a mains electricity supply failure,
all the settings on the electronic clock are
deleted and 00.00 flashes on the clock dis-
play. It is necessary to set the time and the
cooking function again.
Child safety function
The oven controls and settings can be blocked
to prevent small children from interfering with
them. To block the controls, touch symbols
and
on the glass at the same
time. A beep is heard and flashing dots
appear between the digits on the clock to indi-
cate that the oven controls are blocked.
If the child safety function is activated when
the oven is off, then the oven cannot be
turned on. If this safety function is activated
while another function is in progress, then the
controls on the electronic clock are blocked.
To deactivate the child safety function, touch
symbols
,
and
on the glass at the
same time again. A beep is heard to confirm
,
deactivation.
27
Publicidad
Tabla de contenido
