Using The Oven - Teka HA-890 Hoja De Características

Using the Oven

1 2 3
Choosing a cooking function
To select a cooking function, extract the
function selection control and turn it until the
symbol for the function you want to use
flashes on the control panel. Two beeps are
then heard before the cooking function lights
up permanently.
To turn the oven off, turn the function selec-
tion control (5) until there is no symbol on the
control panel and the word OFF appears on the
temperature display (8), or touch the symbol
on the glass for more than 2 seconds. The
oven turns itself off.
Choosing a cooking temperature
When a cooking function has been chosen, a
temperature specific to the function chosen
appears on the control panel temperature
display (8) by default.
To change this temperature, extract the
temperature selection control (7) and turn
until the desired temperature appears.
During the fast pre-heating stage, the light on
the temperature indicator (6) flashes as the
24
4 5 6 7 8
Important
At the start of the cooking process, the oven
pre-heats quickly until the selected temperature
is reached. The fan inside the oven comes on
during this pre-heating process.
temperature inside the oven increases. When
the pre-heating stage finishes, the indicator
light comes on permanently to show the
temperature inside the oven.
When the oven is turned off, the temperature
indicator light stays on until the oven cools
down.
Using the Electronic Clock
Important
Your electronic clock is equipped with Touch-
Control technology. The controls are operated
by simply touching the desired symbol on the
glass with your fingertip.
The sensitivity of the touch controls constantly
adapts to accommodate atmospheric condi-
tions. When connecting your oven to the
mains electricity supply, make sure that the
glass surface on the control panel is clean
and free of all obstacles.
If the clock does not respond correctly when
the glass is touched, disconnect your oven
from the mains supply and reconnect it a few
seconds later. Doing this automatically resets
the sensors, which should now react to touch
once again.
Setting the time on the electronic clock
When the oven is connected, 00.00 flashes
on the clock display. The time on the clock can
be set by touching the + and – symbols on the
glass. Two beeps are then heard to confirm
the setting.
If you wish to modify the set time on the clock,
touch symbols +, and at the same
time to enter the change-time mode. Release
symbols and , and change the time
using symbols + and –. Two beeps are then
heard to confirm the new setting.
Manual operation
When the time has been set on the clock, the
oven is ready for use. Choose a temperature
and a cooking function.
To turn the oven off, turn the function selec-
tion control (5) until there is no symbol on the
control panel and the word OFF appears on
the temperature display (8), or touch the
symbol on the glass for more than 2 seconds.
The oven turns itself off.
Functions of the electronic clock
Cooking time: to cook for a set period of time.
When the set time comes to an end, the oven
turns itself off automatically.
End-of-cooking time: to cook until a specific
time is reached. When the set time is
reached, the oven turns itself off automatically.
Cooking time and end-of-cooking time: to set
the cooking time and the end-of-cooking time.
When this function is used, the oven turns
itself on automatically in order to cook for the
period of time set (cooking time) before
turning itself off automatically at the time set
for the end-of-the cooking process (end-of-
cooking time).
Alarm: the alarm sounds at the end of the
time period set. The oven does not need to be
working to use this function.
Child safety: to block the oven when small chil-
dren are likely to be present.
Setting a cooking time
1 Touch symbol on the glass until the
indicator light above the symbol starts
flashing.
2 Set the period of time for cooking by touching
the + symbol on the glass.
3 Two beeps are then heard, and the flashing
indicator light comes on permanently to
indicate that the oven is set to turn itself
off automatically.
4 The clock shows the real time again.
5 Choose a temperature and a cooking
function.
6 To modify the set time, touch symbol
and then touch the + and – symbols on the
glass. Two beeps are heard to confirm the
new setting and the real time appears on
the clock again.
7 When the period of time set for cooking
comes to an end, the oven turns itself off,
the alarm sounds and the indicator light
starts flashing.
25