Baby auto DUPLA Duofix DS20 Manual De Uso página 15

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

16. Do not disassemble, modify, or add any piece to the child seat or harness,
as this would seriously affect its basic functioning and the safety that the
child seat provides.
17. The safety seat must remain installed in the vehicle with the safety belt,
even if the child is not seated in the child seat. The child must never be left
unattended while seated in the safety seat, not even outside the vehicle.
18. Keep the safety seat away from corrosive products.
19. Do not use anchor points that are not listed in the instruction manual and
indicated on the seat.
20. The seat should be replaced after undergoing the violent stresses
associated with an accident.
21. The manufacturer guarantees the quality of its products, but not the quality
of second-hand products or products belonging to other companies.
22. Instruction illustrations are for informational purposes only. The child
restraint system may contain small differences compared to the
photographs or images in the instruction manual. These variations do not
affect its certification under ECE Regulation R44/04.
23. Ensure that any strap or belt that holds the child is not bent or twisted and
keeps tightened. Act under the same criteria with the vehicle belts that
serve as a restraint for the chair.
1. OVERVIEW
A. Headrest
B. Diagonal belt guides
(Group 2/3).
C. Shoulder protectors.
D. Reductor cushion.
E. Harness straps.
F. Harness buckle.
G. Harness adjustment button.
H. Harness adjustment strap.
I. Reclining lever.
J. Abdominal belt guides.
28
K. Headrest height adjuster.
L. Diagonal belt guides. (Group 1).
M. Harness strap connectors.
N. Vehicle belt locking device.
O. Rear Isoclick Fix
arms.
®
P. Rear Isoclick Fix
unlock button.
®
Q. Front Isoclick Fix
arms.
®
R. Top Tether brake.
S. Top Tether hook.
T. ISOFIX insert guides.
2. VEHICLE INSTALLATION POINTS
WHERE:
In the vehicle rear seats.
Please, do NOT install the safety seat in forward seats except for the following
cases:
1. Whenever the vehicle does not count with rear seats.
2. When all rear seats are already occupied by children exceeding 135 cm
height.
3. When it is not possible to install all child restraints systems in the rear
seats.
*Note: According to Spanish legislation for child restraint systems (Royal Decree 667/2015).
HOW:
GROUP 0+/1 • Install rearward facing.
GROUP 1 • Install forward facing.
GROUP 2/3 •Install forward facing.
In seats with:
ISOFIX anchorages (between seat and backrest) and Top Tether anchor points
(eg in the tray, on the floor or behind the backrest) and 3-point belt (vehicle belt).
NOTICE:
The child seat must only be used in this seat IF it has a lap and diagonal belt
(3 points).
The seat offers a number of assembly options. The following table shows the
installation types for each group:
GROUP
SEAT POSITION
SEAT INSTALLATION
0+
• Rearward facing
3 point Vehicle´s belt
0-13 kg
Rearward facing
1
3 point Vehicle´s belt
9-18 kg
• Forward facing
2/3
• Forward facing
3 point Vehicle´s belt
15-36 kg
Isoclick Fix® + 3 point
0+
• Rearward facing
0-13 kg
Vehicle´s belt
• Rearward facing
Isoclick Fix® + 3 point
1
9-18 kg
• Forward facing
Vehicle´s belt
Isoclick Fix® + Top Tether + 3
2
• Forward facing
15-25 kg
point Vehicle´s belt
Isoclick Fix® + 3 point
2/3
• Forward facing
15-36 kg
Vehicle´s belt
1
2
CHILD INSTALLATION
5-point belt
5-point belt
Vehicle´s belt
5-point belt
5-point belt
5-point belt
Vehicle´s belt
29

Publicidad

Tabla de contenido
loading

Tabla de contenido