Black and Decker GR340 Manual De Instrucciones página 6

Handy hints
•
On long grass, above 10cm (4 inches), use two
cuts to get a close finish. We recommend that
the first cut should be taken with the blade set
at maximum height of cut and the second taken
with it set at medium or close. This will prove to
be easier and give a better overall finish to
your lawn.
Care and maintenance
The advice given in this section covers the
general care and maintenance of the main
body of your mower. Advice relating to the
blades is given in "Blade maintenance".
Warning! Do not use an extension cable
which shows signs of damage. Fit a new
cable completely - do not make any
permanent or temporary repairs.
•
Always keep your mower clean and free
from grass cuttings, especially the
underside of the cutter deck and the air
vents.
•
Check all electrical cables at regular
intervals, looking for signs of wear,
abrasion or other damage.
•
At the end of each cutting session we
recommend that the build up of grass
on the underside of the cutter cover is
removed using a blunt scraper.
•
Clean all plastic components with a
damp cloth.
Caution: Do not use solvents or cleaning
fluids as these may damage the plastic
components of your mower.
Fault finding
If your mower does not operate correctly,
use the following table to locate the problem.
Warning! Always disconnect your mower
from the electrical supply before carrying
out any inspection.
Symptoms Possible cause Remedy
Motor buzzes Blade jammed. Disconnect from
but blade does
not move.
No noise and Faulty electrical Disconnect from
blade does connection.
not move.
6
Symptoms
No noise and
blade does
not move.
Protecting the environment
You can check the location of your nearest authorised
repair agent by contacting your local Black & Decker
office at the address indicated in this manual.
Alternatively, a list of authorised Black & Decker
repair agents and full details of our after-sales
service and contacts are available on the Internet
at: www.2helpU.com.
Guarantee
Black & Decker is confident of the quality of its
products and offers an outstanding guarantee.
This guarantee statement is in addition to and in no
way prejudices your statutory rights. The guarantee
is valid within the territories of the Member States
of the European Union and the European Free
Trade Area.
If a Black & Decker product becomes defective due
to faulty materials, workmanship or lack of
conformity, within 24 months from the date of
purchase, Black & Decker guarantees to replace
defective parts, repair products subjected to fair
wear and tear or replace such products to ensure
minimum inconvenience to the customer unless:
•
The product has been used for trade,
professional or hire purposes;
•
The product has been subjected to misuse or
neglect;
the electrical
•
The product has sustained damage through
supply.
foreign objects, substances or accidents;
Remove
•
Repairs have been attempted by persons other
obstruction from
than authorised repair agents or Black & Decker
the blade.
service staff.
the electrical
supply.
Plug your mower
into an alternative
compatible
electrical supply.
Possible cause Remedy
Faulty electrical Fit a new fuse.
connection. Re-tighten and
check all electrical
connections in
extension cables.
Re-set RCD in
accordance
with instructions.
Black & Decker provides a facility for
recycling Black & Decker products once
they have reached the end of their working
life. This service is provided free of charge.
To take advantage of this service please
return your product to any authorised repair
agent who will collect them on our behalf.