Installation - Agilent Technologies Turbo-V 1K-GRetrofit Manual De Instrucciones

Installation

Do not install or use the pump in an environment exposed to
atmospheric agents (rain, snow, ice), dust, aggressive gases, or in
explosive environments or those with a high fire risk.
During operation, the following environmental conditions must be
respected:



Do not remove the adhesive and protective cap before connecting the turbopump
CAUTION!
to the system.
Figure 2
In the presence of magnetic fields the pump must be protected using
a ferromagnetic shield. See the appendix "Technical Information" for
detailed information.
The Turbo-V 1K-G Retrofit must be connected to a primary pump (see
"Technical Information").
Turbo-V 1K-G Retrofit User Manual / 87-900-996-01 (B)
maximum pressure: 2 bar above atmospheric pressure
temperature: from +5 °C to +35 °C (see the diagram pressure-
temperature in the appendix "Technical Information")
relative humidity: 0 – 95 % (non-condensing)
Instructions for Use

Installation

231/294
16