Standard Rack Controller Compatible Vent Valve Mod. 9699843 - Agilent Technologies Turbo-V 1K-GRetrofit Manual De Instrucciones

Do not overtighten the valve as this may damage the thread on the pump.
CAUTION!
Then connect the cable from the valve to the suitable connector on
the controller (see the preceding paragraph "INTERCONNECTIONS").
Standard Rack Controller Compatible
Vent Valve mod. 9699843
Figure 34
This vent valve has a fixed delay time of about 5 sec. This value can
be used only with rack controller.
To install the vent valve execute the same steps as the vent valve
model 9699834 (see the above paragraph).
Turbo-V 1K-G Retrofit User Manual / 87-900-996-01 (B)
Technical Information
Vent Accessories
277/294
17