Maintenance - Agilent Technologies Turbo-V 1K-GRetrofit Manual De Instrucciones

Maintenance

The Turbo-V 1K-G Retrofit does not require any maintenance. Any
work performed on the system must be carried out by authorized
personnel.
Before carrying out any work on the system, disconnect it from the mains,
WARNING!
vent the pump by opening the appropriate valve, wait until the rotor has
stopped turning and wait until the surface temperature of the pump falls
below 50 °C.
In the case of breakdown, contact your local Agilent service center
who can supply a reconditioned system to replace that broken down.
Before returning the pump to the constructor for repairs, or advanced exchange
NOTE
service, the "Request for Return" sheet attached to this instruction manual must
be filled-in and sent to the local sales office. A copy of the sheet must be inserted
in the system package before shipping.
If a system is to be scrapped, it must be disposed of in accordance
with the specific national standards.
Turbo-V 1K-G Retrofit User Manual / 87-900-996-01 (B)
Instructions for Use

Maintenance

237/294
16