If the lifting pedal is released without pressing in the lock
button, the cutting deck will be lowered to the mowing
position.
The pedal can also be used to temporarily adjust the cutting
height, such as when passing a minor bump in the lawn.
Operation of blades.
Loosen the lever, move it forward and the blades start to
rotate.
Move the lever back and lock it to stop the blades from
rotating.
Cutting height adjustment lever
The cutting height can be adjusted to 5 (1-5) different
positions with the cutting height lever.
Position 1 indicates the lowest cutting height and position 5
the highest.
Never use position S when mowing. Position S is the service
position.
PRESENTATION
Seat
The seat has a jointed attachment on the front edge and can
be tipped forward.
The seat can also be adjusted lengthways.
Loosen the bolts under the seat and adjust it forwards or
backwards to the desired position.
Fueling
The engine runs on unleaded petrol with a minimum octane
rating of 85 (not mixed with oil). We recommend the use of
biodegradable alkylate petrol.
Allways use fresh and clean, unleaded petrol. Do not use
petrol that contains methanol.
Do not fill the tank completely, leave an expansion area of at
least 2.5 cm (1").
!
IMPORTANT! Do not use the fuel tank as a support area.
WARNING! Petrol is highly inflammable.
Exercise care and refuel outdoors (see
safety instructions).
– 121
English