Lighted Lid; Replacing The Bulb; Replacing The Temperature Display Battery - Gastrodomus GRANISMART 3 Manual Del Usuario

7.8. Lighted lid

Maintenance of the lighted lid must be entrusted solely to a
specialized technician, who must organize all of the operation-
al sequences and use suitable equipment, in strict compliance
with the applicable regulations currently in force.
The operator is forbidden to disassemble any lid component.
Warning! Only handle the lids with your hands. Do not use any
type of tool that could damage the lid or its components.
To carry out maintenance operations on the lighted lid, remove the lid from the
machine and unplug it.

7.8.1. Replacing the bulb

The bulb must be replaced only when the main switch is in posi-
tion -0- and power cord is unplugged.
Separate the two parts of the lid by removing the screws; use a suitable screw-
driver for this purpose.
Fig.68
- 22_EN -
Remove bulb "U" from lamp holder "T" and fi t a new bulb in its place.
Reassemble the lid and fasten it with the two screws.
Fig.69

7.9. Replacing the temperature display battery

To ensure that it works properly, each thermometer is powered separately by
one 1.5 V button battery (code GPA76).
Warning! Only handle the thermometer with your hands. Do not
use any type of tool that could damage the thermometer.
To replace the battery proceed as follows:
• using a screwdriver, remove the front cover;
Fig.70
T
U
SL320000819 Ed.12 - 07-2013