Kärcher VC 4s Cordless Manual Del Usuario página 25

Operation
Note
The appliance cannot be turned on with-

out the HEPA filter or the dust container.
Ensure the HEPA filter and the dust con-
tainer are properly positioned in the ap-
pliance before using the appliance.
Press the ON/OFF button to start vacu-

uming up dust / dirt.
Illustration H
By default, the appliance runs in full
speed mode.
Press the ON/ON button again switches
the appliance off.
 You can adjust the suction power while
vacuuming via the Power Mode button.
Illustration I
3 suction modes are available with full
speed, medium speed and energy sav-
ing modes.
The table below describes the details of
suction power stages:
Suction Full speed
mode mode indi-
cator status
Full speed On
mode
Medium Off
speed
mode
Energy Off
saving
mode
Indicators
Illustration J
Charging / discharging / battery indica-
1
tor
Floor nozzle indicator
2
Full speed mode indicator
3
The table below describes the meanings of
LED indicators on the appliance:
Description
To capture heavy
and deep-down
dirt
To clean up soft
or hard floor at
optimized and
moderate speed
Long-lasting fea-
ture designed for
the long-running
job
English
Indica- Status /
tors Color
Battery in- Flashing
dicator - (green)
charging
Always on
(green)
Battery in- Always on
dicator - (green)
discharg-
Always on
ing
(red)
Floor noz- On
zle indica-
tor
Off
Full speed On
mode indi-
cator
Off
Electric floor nozzle
Attach the soft brush roller floor nozzle to
clean carpets and floors, etc.
Illustration K
One click to clear out dust
1. Press the button on the left to clear out
dirt in one step.
Illustration L
Standard accessories
 Attach the fabric nozzle to clean uphol-
stered furniture, mattresses, laced cur-
tains, etc.
 Attach the crevice nozzle.
Illustration M
Illustration N
This is used for cleaning joints, grooves
1
between doors and windows, tiny slits,
etc.
This is used for cleaning delicate ob-
2
jects with care, e.g. bookcases, handi-
crafts, etc.
Description
Charging
The battery power is
full.
The battery power is
above 10%.
The battery power is
below 10%.
The brush roller of
the floor nozzle is
running.
The brush roller of
the floor nozzle is
stopped.
The appliance is
running in full speed
mode.
The appliance is
running in energy
saving / medium
speed mode.
25