Sony ZS-M7 Manual De Instrucciones página 47

Tips
• To exit the standby
mode, press STANDBY
to make either "TIMER
REC" or "TIMER
PLAY" disappear from
the display.
• The preset settings
remain until you reset
them.
• As long as the t
indication appears in
the display, the player
is in timer mode.
6
Set the timer to the hour and the minutes you want
to stop recording. (Do as step 5.)
7
Turn the jog dial to set
the volume you want,
and press ENTER•YES.
8
Press STANDBY.
"TIMER REC" is displayed, and the player enters
the standby mode.
At the preset time, the power will go on and the
recording will start. Then the power will go off at
the preset time, and the player will enter the
standby mode again.
To check/change the recording timer settings
Press TIMER, then press ENTER•YES. Each time you
press ENTER•YES, a stored setting is displayed in the
set order. To change the setting, display the setting
you want to change and re-enter it.
To use the player before a timer-recording starts
If you turn on the player, you can use it as usual ( in
case of the radio, if you listen to the station which is
different from the one you tuned in step 1 on page 46,
you will hear that station at the preset time.) Turn off
the player before the preset time.
To stop timer-recording
Turn off the power.
47 GB
The Timer