Editing Recorded Tracks On The Md; Before Editing - Sony ZS-M7 Manual De Instrucciones

Editing recorded tracks on the MD

Before editing

On the MD, track marks are inserted
between the tracks. You can find the
beginning of the tracks quickly using
the track marks. You can change the
positions of the track marks. For
instance, you can divide a certain track
into several tracks by adding track
marks. You can also combine some
tracks into a new longer track by
erasing some track marks.
The position of the track marks to
be added are different depending
on the type of recording or
recording conditions
The type of The position of the
recording track marks to be
added
Recording The same positions on
a whole CD the source CD
(page 6)
Recording • The same positions on
from a CD the source CD
using REC • The position where
button you pause recording
(page 27) • The position where
you press REC
Recording • When there is no
from the radio sound input or a soft
or other sound continues
equipment during recording for
connected to more than two
the player seconds
(pages 26 and • The positions where
52) you pause recording
• The positions where
you press REC
You can add or erase track marks after
recording. When you record, for
instance, from a radio or other
equipment connected to the player,
track marks may be added to the
positions you do not want. If that
happens, change the positions of the
track marks to those you want.
Change the track marks correctly
• To erase a track mark n
"Combining recorded tracks
(Combine Function)" (page 36): You
can combine two tracks into a single
one by erasing the track mark
betrween the two tracks.
• To add a track mark n "Dividing
recorded tracks (Divide Function)"
(page 34): You can divide one track
into two tracks by adding a track
mark.
Editing recorded tracks on the MD
continued
GB
29