Oase FiltoClear 5000 Instrucciones De Uso página 41

Cleaning the foam filters
The Easy Clean function is used to clean the foam filters. During cleaning, the filter pump is
switched on so that the dirt water is transported out of the pressure filter.
 Turn the turning valve to guide the water in the container to the dirt water outlet. This pre-
vents the dirt water from flowing back into the pond.
– Beforehand, remove the cover cap from the outlet hose for the dirt water.
 Pull the cleaning handle to compress the foam filters. The dirt particles are removed and flow
with the water via the dirt water outlet, for instance to a flower bed.
 The transparent hose connectors allow you to check the water flow and assess the degree of
soiling in the water during cleaning on the dirt water outlet. As soon as the water runs clear,
turn the turning valve back to "Filtering".
 After cleaning, close the dirt water hose or the dirt water outlet with the cover cap and the
flat seal.
EN
FCL0020
41