Oase FiltoClear 5000 Instrucciones De Uso página 43

Positioning the filter cover
 Ensure that the O-ring on the container is positioned correctly on the container rim.
– Moisten the seal with water or grease the seal, if necessary, so that the filter head is easier
to push onto the container.
 Evenly and forcefully push the filter cover as far as possible onto the container.
– The filter ring must make full contact with the container, otherwise the clamping ring will
not close.
 Fasten the filter cover with the clamping ring and close the locking latch.
– The locking latch prevents the clamping ring from coming loose accidentally, which would
cause pond water to leak in an uncontrolled manner.
– Use flat nose pliers if the locking latch is hard to move.
 Attach all hoses (screw hose connectors in place).
EN
FCL0019
43