Picture Control - JVC HR-S8006UM Manual De Instrucciones

1 2
4 5
7 8
0
1
MENU
JOG
SHATTLE
3
2
6
9
4
OK

Picture Control

This feature helps you to adjust the playback picture quality
according to your preference. *The default setting is "AUTO."
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar (arrow) to "FUNCTION SET" by
pressing CH5∞ or % fi, then press OK or
SELECT PICTURE CONTROL
SET MODE
3
Move the highlight bar
(arrow) to "PICTURE
CONTROL" by pressing
CH 5 ∞ or % fi, then press
OK or to select the
desired mode.
AUTO*: Normally select
"AUTO".
It automatically
adjusts the picture quality.
* When B.E.S.T. is set to "OFF" (
can only select "NORM" instead of "AUTO".
EDIT: Select when you dub tapes.
SOFT: Select when you want to soften the picture.
SHARP: Select when you want to sharpen the picture.
NOTES:
When you select "EDIT", "SHARP" or "SOFT", the
selected mode will not change until you select again.
When you select "EDIT" to dub tapes, be sure to
select "AUTO" (or "NORM" when B.E.S.T. is set to
"OFF") after you finish dubbing the tapes.
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTE:
Select "EDIT" when you are dubbing tapes. Refer to page 39.
17
EN
.
FUNCTION
B.E.S.T. ON
=PICTURE CONTROL
AUTO
AUTO TIMER OFF
SUPERIMPOSE ON
AUTO SP = EP TIMER
OFF
VIDEO STABILIZER OFF
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
pg. 22), you