Video Stabilizer - JVC HR-S8006UM Manual De Instrucciones

18
EN
1
4
7
1
MENU
PLAYBACK AND RECORDING FEATURES (cont.)
2 3
2
5 6
8 9
0
4
OK

Video Stabilizer

By activating the Video Stabilizer you can correct vertical
vibrations in the picture when playing back unstable recordings
that were made on another VCR. When this function is set to
"ON", vertical vibration will be automatically corrected. *The
default setting is "OFF".
ACCESS MAIN MENU
SCREEN
JOG
SHATTLE
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar
(arrow) to "FUNCTION
SET" by pressing CH5 ∞ or
%fi, then press OK or
ACTIVATE VIDEO STABILIZER
3
Move the highlight bar
(arrow) to "VIDEO
STABILIZER" by pressing
CH 5 ∞ or % fi, then press
OK or
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
When you finish viewing the tape, be sure to set it back to
"OFF".
Regardless of the setting, this function has no effect, during
recording and during special-effects playback.
The Superimpose mode indications may jitter vertically when
"VIDEO STABILIZER" is set to "ON".
To watch recordings with close-caption, it is necessary to set
the Video Stabilizer function to "OFF".
= FUNCTION SET
TUNER SET
INITIAL SET
.
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
B.E.S.T.
PICTURE CONTROL
AUTO TIMER
to set to "ON" .
SUPERIMPOSE
AUTO SP = EP TIMER
=VIDEO STABILIZER
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
MAIN MENU
FUNCTION
ON
AUTO
OFF
ON
OFF
ON