JVC HR-S8006UM Manual De Instrucciones página 81

1
4
NUMBER
7
1
MENU
2 3
2
5 6
8 9
0
4
OK
ACCESS GUIDE CHANNEL
SET SCREEN
4
Press CH5∞ or %fi to
move the highlight bar
(arrow) to "GUIDE
CHANNEL SET", then
press OK or #.
JOG
SHATTLE
INPUT GUIDE CHANNEL
NUMBER
5
Press CH5∞,%fi or the
appropriate NUMBER keys
to input the VCR Plus+
Guide Channel number as
shown in the TV listing.
Then press OK or #.
INPUT RECEIVING CHANNEL
NUMBER
6
Press CH5∞, %fi or the
appropriate NUMBER keys
to input the number of the
channel on which the
Guide Channel's broad-
casts are received. Then
press OK or #.
Repeat steps 5 and 6 for
each instance.
RETURN TO NORMAL
SCREEN
7
Press MENU.
ATTENTION CABLE BOX SUBSCRIBERS
In order to set the Guide Channel for a cable program,
you must select your cable box's output channel as the
VCR channel in step 6. If the cable box is connected to
your VCR's ANT. IN connector, select the cable box's RF
output channel. If the cable box is connected to your
VCR's VIDEO IN and AUDIO IN connectors, press
NUMBER key "0" to select "L-1" as the VCR channel.
It is important that you keep the cable box ON and
tuned to the cable station of the program you want to
record until timer recording is completed.
31
EN
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH
=GUIDE CHANNEL SET
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
(Ex.) When inputting the
Guide Channel number
6 for WNJU(Ind.)
GUIDE CHANNEL SET
GUIDE CH : 6
VCR CH : – – –
PRESS NUMBER KEY (0-9)
OR (5,∞), THEN (OK)
PRESS (MENU) TO END
(Ex.) If WNJU(Ind.) is
received on channel 47
GUIDE CHANNEL SET
=
GUIDE CH : 6
VCR CH : 47
PRESS NUMBER KEY (0-9)
OR (5,∞), THEN (OK)
PRESS (MENU) TO END