Kit Assembly - Metra 99-6506 Instrucciones De Instalación

DIN radio provision with pocket
1. S lide the DIN cage into the radio
housing and secure by bending the
metal locking tabs outward. (Figure A)
2. Slide the aftermarket radio into the cage
and secure. Snap the trimplate into the
radio housing. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra. Test
the radio for proper operation.
4. Secure the completed assembly into the
dash using the factory screws.
5. Reassemble the dash in reverse order
of disassembly.

KIT ASSEMBLY

(Figure A)
(Figure B)
ISO DIN radio provision with pocket
1. Secure the ISO radio brackets to the
aftermarket radio with the screws
supplied with the radio. (Figure A)
2. Slide the bracket/radio assembly into
the radio opening until the side clips
engage. Snap the trim plate into the
radio housing. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra. Test
the radio for proper operation.
4. Secure the completed assembly into the
dash using the factory screws.
5. Reassemble the dash in reverse order
of disassembly.
(Figure A)
(Figure B)
REV. 5/14/2018 INST99-6506
3