Generac 0060550 Manual De Instrucciones página 12

Unpacking and Inspection
Figure 2-3. Circuit Breaker Box and Keys (As
Shipped)
5. There are two locks securing the lid; one on each
side. To properly open the lid, press down on the lid
above the side lock and unlock the latch.
6. Repeat for the other side. If pressure is not applied
from the top, the lid may appear stuck.
NOTE: Always verify that the side locks are unlocked
before attempting to lift the lid.
7. See Figure 2-4. Once the lid is open, remove the
front access panel by lifting it up and out. Also
remove the black panel, indicated by the arrow,
over top of the customer connection area.
Figure 2-5. Customer Connection Area and Loose Parts Location
8
8. Perform a visual inspection for any hidden freight
damage. If damage is present, contact the freight
carrier.
000932
Figure 2-4. Inspect for Damage
9. Figure 2-5
A Customer connection area (underneath and behind
the control panel)
B Fuel regulator
C Battery compartment
D Positive (+) and Negative (-) Battery Cables
E Location of "Parts Shipped Loose"
Owner's Manual for 60 Hz Synergy Generator™
illustrates the following:
A
B
D
E
C
001374
001375